CLT5 Dual Inlet Position Control
NEW!
- An expanded version of the CLT2 Digital Inlet Position Control providing simple operation of opening and closing inlets in stages.
- Can be used to control up to two inlet geardrives in one of three ways:
- 12 stage position control.
- 6 independant stages of position control per geardrive.
- 0-10 volt input control.
- Easy to read large digital display can show:
- Input condition.
- Geardrive position.
- Easy feedback potentiometer calibration procedure.
- All settings easily adjustable.
- Inlet control output can be connected to any suitable geardrive controller.
Click here to download a copy of the brochure.
See also:
|
 |
CLT4 Air Pressure Inlet Control
NEW!
  
Click on the images above for a larger view
- Designed to be a direct replacement of Climatec's Air Pressure Control.
- Large display shows current pressure.
- Can operate up to two inlet drive systems with position feedback.
- Easy feedback potentiometer calibration procedure.
- All settings easily adjustable.
- Minimum and maximum controls tie in to the fan stages.
- Inlets will open immediately to the minimum position setting when the first stage (cycle timer) fans switch on.
- Maximum position will automatically be set to 100% as the ventilation control advaces up through the stages.
- Option to have the Pressure control operate at a different pressure setting via external contact. e.g. higher pressure setting for cold nights.
- Can be used to upgrade existing pressure controls or as a new standalone product using a DP59/W Pressure Sensor.
- Can be built into a Climatec, built to order inlet control panel (an example pictured above).
Click here to download a copy of the brochure.
See also:
|
|
CLT2 Digital Inlet Position Control
- Simple operation for opening and closing inlets in stages.
- An extension to existing controls e.g. CLT1 4 stage thermostat and the HC38A 6 stage thermostat.
- Inlet settings for each fan stage are easily set and altered to accommodate climate change and growth cycles.
- Interface for connection via the fan panel to the fan stages.
- Inlet control output can be connected to any suitable geardrive controller.
- Can control any geardrive controller using either:
- Open and close control, or,
- 0-10 Volt analog control.
- Wide range of gear drives, actuators, and modular side/ceiling inlets available.
- Installation can be carried out by Climatec engineers.
Click here to download a copy of the brochure.
See also:
|
|
|
|
|
|
